
According to the Cleveland Clinic and The Sleep Foundation, the optimal sleep temperature is between 60-68 degrees Fahrenheit (15.6-20 degrees Celsius). Cleveland Clinic sleep psychologist Michelle Drerup, PsyD stated the optimal temperature range is between 60-67 degrees Fahrenheit (approximately 15.6-19 degrees Celsius). The Sleep Foundation identifies the ideal sleep temperature as approximately 65 degrees Fahrenheit (18.3 degrees Celsius) and recommends using a range of 65-68 degrees Fahrenheit (approximately 18.3-20 degrees Celsius). A cooler sleeping environment is essential because as you fall asleep, the temperature of your body’s core decreases. The peer-reviewed review of thermal environment and sleep indicates that an elevated thermal environment will increase the duration of sleeping hours and decrease the quality of both deep and REM sleep, regardless of how you are insulated by bedding.
Studies conducted under laboratory conditions that took into account the effects of bedding produced warm neutral temperature ranges of [around 20–26°C (68–79°F)] because bedding creates an insulating layer of warm air next to your body. Consequently, a person may feel positive effects of sleeping in a particular temperature setting underneath a sheet, but at the same time feel stifled by a heavy down comforter. The information presented here pertains to sleep in adults and thus is not intended to be a medical guideline for infants. The temperature indicated on a thermostat does not entirely represent the temperature that an individual will experience while sleeping.
The Published Temperature Ranges — and Why They Don’t Agree
Comparing published consumer health pages and research studies side by side shows that the two sources have differing numbers, yet the gap is not as significant as one might think. Consumer health pages specify 60–68°F (15.6–20°C) whereas research studies list 19°C to 26°C (66–79°F). The difference is mostly due to the demographic of the participants and how they were tested concerning bedding and/or what was measured during testing.
Every table shown in this section includes the range of temperatures in both Fahrenheit and Celsius and where each temperature came from. The Celsius temperatures were converted from the Fahrenheit temperatures for this section and vice versa.
| Source | Range (°F) | Range (°C) | Basis the source gives | Population and bedding | Type of source |
|---|---|---|---|---|---|
| Sleep Foundation | About 65; band of 65–68 | About 18.3; band of 18.3–20 | Links a cooler room to the body’s natural nighttime temperature drop; no study cited for the specific number | Adults generally; bedding not stated | Consumer health publisher, medically reviewed |
| Cleveland Clinic (Michelle Drerup, PsyD) | 60–67; calls above 70 “too hot” and below 60 “too cold” | 15.6–19.4 | Says the range “is thought to” help keep REM sleep stable | Adults; bedding not stated | Hospital health publisher, expert rule of thumb |
| Cleveland Clinic newsroom (Brian Chen, MD), May 2026 | About 60–67, “often recommended” | 15.6–19.4 | Core temperature needs to drop during sleep | Adults; bedding not stated | Hospital press release |
| Harding, Franks & Wisden, 2019 | About 66–70 | About 19–21 | Summarizes earlier lab studies in which sleepers kept skin microclimates of 31–35°C | Lab participants using bedding | Peer-reviewed review |
| Lan & Lian, 2016 | 68–79 with bedding; about 84 uncovered | 20–26 with bedding; 29 mainly uncovered | Thermal-neutral temperatures compiled from sleep experiments | Mostly small lab samples; covering varied by study | Peer-reviewed review |
| Baniassadi et al., 2023 | 68–77 | 20–25 | Range where sleep, measured by a wearable ring, was most efficient and restful at home | 50 adults aged 65 and over in Boston, own bedding | Peer-reviewed observational study |
| Health Canada, June 2026 | Upper limit of 78.8 | Upper limit of 26 | Heat-illness evidence; stated as a health-protective limit, not a comfort target | Adults aged 60 and over at home | National health guidance |
Neither consumer health web page stated which bedding or pajamas were assumed within their range; nor did they provide a citation for a study from which they derived their specific number. This does not mean that either page is incorrect. However, by looking at the titles and context clues on both these pages, no assumptions can be made about what type of sleep was depicted by these numbers. Based on my analysis of research done below, I would suggest that the cooler consumer health web page ranges may generally represent a typical household-type bedding. This is an assumption I made, and is not attributed to either author of the cited pages.
Why the research numbers run warmer
The warmest temperature (29°C) has an obvious reason for being so high. The temperature was derived from testing of semi-nude subjects with no bed covers who were not covered by any blanket or duvet. In both studies discussed by the Lan & Lian review, blankets or other bedding were used, and the neutral temperature for these cases was given as 20–26°C. The authors of the study also state that a clear and well-defined neutral thermal temperature has yet to be established.
The information from the Baniassadi study corroborates the findings regarding the misleading nature of waking up comfort. The adults in the Baniassadi study reported comfort from sleeping at a temperature of 20 degrees Celsius when awake but actually achieved maximum sleep efficiency when sleeping at 23 degrees Celsius under their regular bedding. Therefore, if we use the temperature of our living spaces to set the thermostat (i.e., we set our thermostat by how the room feels when we are awake), we may be measuring an entirely different condition than the one in which we will sleep.
The evidence regarding home sleeping conditions provides an answer to an entirely different question. The Baniassadi study is the only in-depth examination of the average sleep efficiency that older adults achieve when sleeping in their own bedrooms over the course of 10,903 nights of sleep. This study found that the optimal range for maximum sleep efficiency was 20-25 degrees Celsius and that sleep efficiency decreased by approximately 5-10 percent for every five degrees Celsius increase in the average nightly bedroom temperature between 25-30 degrees Celsius. Although it represents the best available evidence on sleeping conditions for people over the age of 65 years of age living within one city, it also provides no compelling evidence to suggest that living at 26 degrees Celsius is comfortable and safe. Living at 26 degrees Celsius is a maximum temperature for health reasons and not necessarily a comfortable one.
So is 65°F too cold? It depends on what you’re under. In one r/sleep thread, the original poster usually keeps the thermostat at 72°F and asked whether 65°F is really ideal: “I feel like that’s so cold.” In the replies, one person sleeps at 65°F under “a lot of blankets,” while another sleeps under “a sheet only” at 70. That’s one thread, not a survey. Still, it shows the variable the published ranges leave out.
Why Sleep Depends on Losing Heat: The Core-Temperature Mechanism
The human body’s temperature operates on a circadian rhythm; specifically, the human body’s core temperature tends to decrease during the time you are asleep and to increase throughout the time you wake during the day. According to the Okamoto-Mizuno review, sleep “is most likely to occur” while the core temperature is falling. During the time your body is asleep, the core’s heat is relinquished primarily through the skin. During this time, the blood vessels located near the extremities, including the fingers and toes, increase in diameter, a process known as vasodilation; as a result, warm blood from the core is released as body heat into the surrounding ambient air.
There is a narrow window of time for this vasodilation to begin; according to the review published by Harding et al. in Frontiers in Neuroscience, vasodilation begins approximately two hours prior to the commencement of the first episode of sleep. While the greatest decline in core temperature generally happens approximately two hours after lights out, the review also clarifies that “cooling of the body” has not been demonstrated to induce the onset of Non-REM sleep but may simply be an effect that is the result of vasodilation. In this respect, the two processes — sleep onset and decreased core temperature — are temporally associated, rather than one causing the other.
Inadequate room temperature affects the ability of your body to cool down, which can make falling asleep more difficult in addition to impacting your ability to reach slow-wave or REM sleep. Heat load suppresses the decrease in core temperature, which research indicates that these results typically occur during the first half of any given night (it’s typical to find that individuals have trouble sleeping the first night of warm summer weather), and the results have proven to be consistent even after five consecutive nights of being exposed to heat.
However, there is also a caveat worth noting when discussing sleep initiation. Research has found that warming peripheral body parts (e.g., feet) has been shown to help with the initiation of sleep, with the review by Harding indicating that warming the torso skin by less than 1 degree Celsius has also been associated with a decrease in time to initiate sleep. In other words, getting your torso good and hot before going to bed can help with the initiation of sleep; however, the term “room temperature” refers to the overall temperature of the room and does not necessarily equate to a cool body. To put it another way, having a room that is considered “cold” (meaning the core body will lose heat) but having skin that still feels warm under the covers makes falling asleep a whole lot easier than having a warm room. This goes in line with what has been previously discussed on a specific thread on r/relationshipsmatter, where one user mentioned that they found it easier to fall asleep in colder air but needed the air to be warm in order to remain sleeping. The studies discussed support this theory by showing that it is necessary to keep the “colder” layer (the room air) cool and not necessarily the warmer, outermost layer (the layer closest to your skin), shortened the time to fall asleep.
Colder isn’t better without limit, either. With bedding, cool rooms between 13°C and 23°C and between 3°C and 17°C didn’t change sleep stages, but cold did change heart-rhythm activity during sleep. The authors state that winter room temperature “should be maintained at a level higher than 10°C.” That advice comes from Japan, where some bedrooms fall far lower than that.
The Temperature You Actually Feel: How Bedding Changes the Equation
Studies point out that, when sleeping, you are not breathing air from your room but are rather breathing the “bed climate” (the temperature/humidity of the air layer that is directly between your skin and your bedding). Also, while you sleep normally, the “bed climate” is generally located around 32 to 34C (89.6 to 93.2F) at 40 to 60% relative humidity and has relative humidities ranging from 40 to 60% (with 32 to 34C might be the lowest point at which people get good sleep).
According to the “Lan and Lian review,” bed climate consists of three components: (1) the air layer that sits between the surface(s) of your body and the inner surface of your bedding; (2) the bedding itself (which may include your pajamas, blankets, sheets, etc.); and (3) the air layer above the bedding but below some rooms. The “Lan and Lian review” has clarified that the total insulation (clothing and bedding combined) will vary depending on (i.e., be determined by) how much you are covered with bedding, mattress types, pajamas worn, and other variables. The total insulation value is commonly called clo (a unit that measures the insulation value of clothing and bedding), while consumer bedding is typically labelled with tog values, which cannot be reliably converted to equivalent room temperatures. Therefore, use caution when interpreting these conversions.
Bedding allows individuals to obtain adequate rest regardless of the outside temperature of their environment. In a recent investigation into how bedding impacts a person’s comfort level based on the environmental temperature, the investigation reported that while [the bed climate stayed fairly constant], the outside environment fluctuated greatly between 13 degrees centigrade to 23 degrees centigrade. The authors of this investigation noted the presence of the coverlets would create a localized elevated climate above the ambient temperature of the room that would allow for continued sleep. Additionally, the authors state that the localized climate temperature could not be achieved without the use of coverlets, even if the ambient room temperature was raised to the same amount of warmth as that felt on the surface of the skin when the room is heated to that specific temperature.
Same thermostat, different duvet
The clearest numbers come from the studies that reported their covering in clo:
| Study (as compiled by Lan & Lian) | Season | Sleepwear and covering | Insulation | Neutral room temperature |
|---|---|---|---|---|
| Pan et al., 2012 | Winter | Full-sleeved sleepwear, quilt | 3.12 clo | 23°C (73.4°F) |
| Lan et al., 2014 | Summer | Short-sleeved sleepwear, thin blanket | 1.64 clo | 26°C (78.8°F) |
| Tsuzuki et al., 2008 | Summer | Short pyjamas, one cotton sheet, one cotton blanket | Not given for the full set | 26°C (78.8°F) |
| Several studies | Not reported | Naked or semi-nude | None | 29°C (84.2°F) |
Using the example of a heavier weight blanket in the winter months and a lighter weight blanket used in the summer months, there is approximately a three degree celsius difference in the neutral temperatures between the heavier weight and lighter weight quilts, which I concluded from two small pilot studies done in different regions, on different days, utilizing different subjects. Therefore, the weight of the coverlet serves to decrease the neutral room temperature, whereas the lighter weight coverlet serves to increase the neutral temperature of the bed. If you put a winter quilt into a room at a high ambient temperature, you will therefore create a localized temperature within the bedding environment well above that which is conducive to continued sleep.
Your body naturally regulates its temperature when you sleep. If you are sleeping in a warmer environment, your body will respond by uncovering more of their body, allowing greater exposure to the surface area of your body. This will generally result in more exposed areas of your body, such as your upper body and arms, and may require you to change your sleeping position from a back position to a side position. When you wake up shivering after removing the duvet from your body at 3:00 in the morning, this is an example of your body regulating itself. Conversely, the opposite situation was reported by a commenter on the same thread: the commenter reported waking up from dreaming they were “being cooked” because their digital thermostat read 61°F instead of their usual 59°, while under several layers of blankets. Their room may have been considered cold by almost any published standard, but their sleeping conditions were not considered to be cold.
Humidity and Air Movement: The Variables That Change How Temperature Feels
Sleep Foundation defines relative humidity as a percentage of the amount of water vapor in the air compared to what the air could contain at that temperature (also known as its “capacity”). The amount of moisture in the air affects sleep because one of the body’s primary means of losing heat is through perspiration. Since sweat cannot cool you down until it evaporates from your skin, the environment around you affects your cooling ability. The Okamoto-Mizuno review found that when people slept in humid environments, there is an increase in the amount of time spent awake, as well as a decrease in both the amount of time spent in rapid eye movement (REM) sleep and the amount of time spent in slow-wave (deep) sleep. Additionally, humid heat held the core body temperature up for longer than heat by itself. Humid environments do not allow your body to effectively lose heat during sleep as compared to dry environments, which would allow the body to cool down through sweating. The reason a humid, or muggy, summer evening makes a bedroom feel warmer, even when the air temperature would be acceptable in a dry environment, is due to the inability of sweat to evaporate from your skin.
Which humidity figure you use depends on which layer you mean. The 40–60% figure in the research describes the air under your covers, not the room. For the room, the US EPA advises keeping indoor humidity below 60%, and ideally between 30% and 50%, in guidance written to control moisture and mold. The Sleep Foundation’s humidity page gives 30–50% as the best range for bedroom humidity for sleep, notes that other studies suggest 40–60%, and treats 60% as the shared upper limit. It also links damp rooms to mold and dust mites. In the Boston in-home study, sleep efficiency peaked at about 50% bedroom humidity, though humidity had a smaller effect than temperature across the range the researchers saw. Health Canada’s guidance leaves humidity out of its temperature limit entirely, citing limited evidence.
Air that is moving helps to deal with the same evaporation issue. The review by Lan & Lian references a study which demonstrates how air moving across the body has helped decrease wakefulness while sleeping in warm and humid conditions by reducing core and skin temperatures. They also state there is evidence to show that increasing the air speed will make it more comfortable for waking people, but it has not yet been established whether that same benefit applies to those who are sleeping. It could be, therefore, that a gentler approach will be more effective than a more vigorous one. The recommendation from the Sleep Foundation is to use either a slow or moderate setting for your air conditioner as a comfortable sleep environment; a strong, cold airflow can disturb sleep. However, this was provided as guidance for the publisher based on a conference abstract so please treat it as a sensible place to start and not as a concrete finding.
Why There Is No Single Right Number for Every Sleeper
The Baniassadi study, which followed every participant for an extensive period, provided some of the most reliable evidence to date regarding individual differences. As outlined by the authors of this study, the authors of that study observed that “substantial between-subject variation” existed among the subjects. For example, when considering the association between temperature and sleep, the association between temperature and sleep was found to vary in both strength and direction between subjects. For example, among the subjects of the Baniassadi study who had a statistically significant association between temperature and sleep, a number of subjects experienced a greater amount of sleep efficiency as their bedroom temperature increased and others experienced less sleep efficiency. This study was comprised solely of older adults, aged 65 years and older. It is the clearest demonstration that there are great variations in an individual’s responses to temperature within any specified population range.
One source of variation between individuals is age. In older adults, even mild heat increases wakefulness and reduces REM sleep, and the authors of the review were able to relate some of this to the decreased ability of older adults to maintain their core temperature. Health Canada’s limit of 26°C for adults aged 60 years and older is framed as a safety ceiling. While the hex 26°C level is provided as a ceiling limit for the safety of older adults, it has also been documented that not everyone may be safe with it, including those who have limited physical ability or mobility and those who may be taking prescription medication that alters how the body handles heat. Health Canada advises that sustained indoor temperatures of between 26 °C and 31 °C (especially overnight) should be avoided wherever possible to avoid potential harm to older adults.
“”” Sex could also be a source of difference, yet evidence concerning sex differences is limited. According to the review by Lan & Lian, one experiment in which women preferred a warmer room during sleep showed that, during sleep, women preferred warmer sleeping conditions compared to men. However, the sample size for this study was only eight subjects, which suggests there is still a lot to learn. “””
Menopause may cause an immediate change in the situation for many women. If they experience night sweats as a result, the National Institute on Aging (NIA) recommends lowering the temperature in the bedroom; layering the bedding so that you can adjust it; using a fan; and drinking small amounts of cold water just before bedtime. If lifestyle changes do not provide adequate relief, the NIA lists both hormonal and non-hormonal options that you should discuss with your doctor.
Bed partners are the everyday version of this problem. The Cleveland Clinic acknowledges the debate when people who sleep hot share a room with people who sleep cold. The clo data in the previous section suggest a practical answer, and this is my inference: two people can sleep at one thermostat setting under different covers, because insulation changes the room temperature each person finds neutral. Lan & Lian make a similar point, noting that people can use covering of different insulation to handle individual and gender differences.
Measuring Your Room and Knowing When Temperature Isn’t the Problem
This is general information only, not medical advice; the climate log is not a diagnostic tool. The purpose of using the climate log is to take an educated measurement of your sleep environment rather than just guessing where that might be.
An example illustrates how the thermostat in your house may not accurately reflect what the temperature feels like in your bedroom. A poster to r/Home described that the AC in their house was set to 68°F with a fan; the fan was on “full blast,” but they felt like it was still “too hot to sleep.” Their temperature reading outside of the bedroom was typically “a good 5-10 degrees” cooler than what they felt while inside their bedroom. One comment suggested adding temperature sensors in each room to determine if it’s actually warmer or just feels warmer in that room. This is just one example, but it’s a good point that you should measure the temperature of the room you sleep in. In addition to that, Health Canada has documented a similar disparity for a larger population: when the weather is hot, people will typically keep their overnight temperatures high even if the surrounding area is much cooler, and indoor temperatures tend to stay high at night.
How to log your room
- Get a combined thermometer and hygrometer. The EPA describes humidity meters as small, inexpensive ($10–$50) instruments sold at hardware stores. A model that records overnight lows and highs saves you from checking at 3 a.m.
- Choose one spot and leave it there. In the Boston study, researchers asked participants not to move their bedroom sensors. Put yours near the bed and away from direct sun, vents and electronics, so each night measures the same thing.
- Record the room and your bedding together. A room reading without the bedding beside it explains only half the night.
- Log for one to two weeks. The NHLBI suggests keeping a sleep diary for 1 to 2 weeks before a doctor’s visit. Using the same window here is my suggestion, and it gives you enough nights to spot a pattern.
This is the template. The first row is a hypothetical example to say how detailed the information can be. The last row(s) will be for you to follow up on your own nights.
| Date | Bedtime room temp (°F / °C) | Overnight low / high | Relative humidity (%) | Bedding layers | Sleepwear | Fan or AC | How you felt (your words) | Notes |
|---|---|---|---|---|---|---|---|---|
| Example only | 70°F / 21°C | 68 / 71°F | 55% | Sheet + medium duvet | T-shirt | Fan, low | Hot around 1 a.m., kicked off duvet | Humid day, window shut |
Reading your log against the ranges
As previously stated, compare your readings with the tables in the first section and not simply one number. A bedroom that has a reading of 21-22°C is above Cleveland Clinic’s and the Sleep Foundation’s recommended ranges. It is included in the Harding/Lan/Lian and Baniassadi ranges which are based on using bedding. If you enjoyed your time in that bedroom, then most likely you will not need to make any changes. If you did not enjoy your time, then you should consider checking the bedding column before you adjust the thermostat. On humid nights, check the humidity reading against the EPA’s recommended humidity levels before making assumptions about the temperature.
When temperature isn’t the problem
A cooler room can’t fix everything. The NHLBI describes insomnia as trouble falling asleep, staying asleep or getting good-quality sleep that happens even with enough time and the right environment. It counts as chronic when it happens 3 or more nights a week for more than 3 months. If your log shows a steady, comfortable room and you’re still sleeping poorly, that’s useful information to take to a clinician. The NHLBI’s list of what a provider may ask about includes snoring loudly or waking up gasping, menopause, and the medicines you take. The Cleveland Clinic gives similar advice: if sleep problems continue at a regulated temperature, see your primary doctor, who can refer you to a sleep specialist.
What to Look For First
Various average ranges of ideal bedroom temperature for sleep exist due to the fact that different bedding and types of sleepers will generate different results, therefore it is not accurate to compare the average bedroom temperature to a single thermostat setting. You should first take a temperature and humidity reading in your bedroom for at least 1-2 weeks at a fixed location every night, while keeping an accurate journal of what you slept in each night. Then, compare all your recorded nights with the complete list of ranges in order to identify any discrepancies you may notice. In many situations, the solution will come by adjusting your bedding to make it more or less heavy, adjusting your airflow, or adjusting your humidity levels (all three of which can provide a larger impact on your ability to sleep than simply raising or lowering your thermostat setting by one degree).
Frequently Asked Questions
Is 70°F too warm to sleep?
The Cleveland Clinic classifies temperatures higher than 70°F as being “too hot”. Laboratory studies looking at bedding showed warmer neutral temperatures than 70°F – with bedding made from winter-weight quilts featuring a temperature of 23°C (73.4°F) and bedding made from lightweight summer-weight blankets featuring a temperature of 26°C (78.8°F). Therefore, not all people will find 70°F to be the same as being too warm, but what they sleep under affects the comfort level.
Should I turn the heating off completely on winter nights?
The results of our review indicate that sleeping in a cool room, with adequate bedding, does not change stage of sleep, but it does alter the heart-rhythm activity during the course of a person’s sleep. Authors of the review recommend keeping bedroom temperatures in winter months above 10°C (50°F) if you do not normally have problems sleeping at temperatures below that.
Is it better to run the air conditioning all night or just at bedtime?
The Okamoto-Mizuno review suggests that when using an electric blanket or heated pad, if you are only able to use it for part of the night, your use should be concentrated on the first half of the night, when humid heat is most likely to interrupt your ability to sleep. If you cannot turn your electric blanket on until later in the night, the authors recommend that prior to using your blanket you should dry off your body and change into dry clothing so that you do not become chilled.